Single CPU% for Switch?

All questions related to installations, configurations and maintenance of Advanced Host Monitor (including additional tools such as RMA for Windows, RMA Manager, Web Servie, RCC).
Post Reply
troyy0206
Posts: 1
Joined: Sat May 24, 2025 5:03 pm

Single CPU% for Switch?

Post by troyy0206 »

We have HP Aruba switches, some are 2 and some are 4 processors. I can monitor each CPU separately with HostMon but is there a way to get one overall CPU utilization value for the switch rather than individual tests? We have nearly 100 switches so it takes 300-400 tests total get readings on them all.
Top
KS-Soft
Posts: 13012
Joined: Wed Apr 03, 2002 6:00 pm
Location: USA
Contact:
Contact KS-Soft

Re: Single CPU% for Switch?

Post by KS-Soft »

We have no idea how to monitor specific Aruba device. We played with Aruba switches a little but looks like many models do not support any SNMP counters within 14823 branch (ArubaOS) so we could not use available MIB files.

If you have some manuals and MIB files from manufacturer and you can provide details about your devices (there are different devices under the same brand), we can check how to setup such test..

Regards
Alex
Top
Post Reply

Return to “Configuration, Maintenance, Troubleshooting”