KS-Soft. Network Management Solutions
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log inLog in 

backupresult of Veeam in Hostmonitor (SNMP Trap)

 
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting
View previous topic :: View next topic  
Author Message
AndreT78



Joined: 05 Feb 2020
Posts: 6

PostPosted: Wed Sep 16, 2020 6:41 am    Post subject: backupresult of Veeam in Hostmonitor (SNMP Trap) Reply with quote

Hi everybody,

does someone capture the backup status of Veeam (9.5) with the host monitor?

I don't get a result in my attempts.

I have imported VeeamBackup.mib into the MIB browser.
SNMP is configured in Veeam.

Does anyone have a screenshot of a working test configuration?

many thanks
Andre
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12303
Location: USA

PostPosted: Wed Sep 16, 2020 6:49 am    Post subject: Reply with quote

Have you set SNMP Trap test?
If it does not react on trap message, try to remove all filters, accept all SNMP Trap messages, then check what exactly data received

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
AndreT78



Joined: 05 Feb 2020
Posts: 6

PostPosted: Wed Sep 16, 2020 8:40 am    Post subject: Reply with quote

Hi,

Thanks, I found my mistake with help from an other Trip Receiver Tool (UDP Port), but here is my next question about this.

How can I make a Filter with 2 OIDs?
1.3.6.1.4.1.31023.1.1.103 = Failed AND
1.3.6.1.4.1.31023.1.1.102 = Backup DC02-106

so i can add test for many different Veeam Backup Jobs.

With just one filter, I can't tell what caused the error when more than one job failed.




Thanks
BR Andre
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12303
Location: USA

PostPosted: Wed Sep 16, 2020 10:05 am    Post subject: Reply with quote

Set option
- Counters fit expression ("%1.3.6.1.4.1.31023.1.1.103%" == "Failed") AND ("%1.3.6.1.4.1.31023.1.1.102%"=="Backup DC02-106")

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
AndreT78



Joined: 05 Feb 2020
Posts: 6

PostPosted: Wed Sep 16, 2020 11:56 pm    Post subject: Reply with quote

Perfect you are the best !!
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12303
Location: USA

PostPosted: Thu Sep 17, 2020 7:26 am    Post subject: Reply with quote

You are welcome

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

KS-Soft Forum Index