backupresult of Veeam in Hostmonitor (SNMP Trap)

AndreT78 · Post by **AndreT78** » Wed Sep 16, 2020 6:41 am

Hi everybody,

does someone capture the backup status of Veeam (9.5) with the host monitor?

I don't get a result in my attempts.

I have imported VeeamBackup.mib into the MIB browser.
SNMP is configured in Veeam.

Does anyone have a screenshot of a working test configuration?

many thanks
Andre

KS-Soft · Post by **KS-Soft** » Wed Sep 16, 2020 6:49 am

Have you set SNMP Trap test?
If it does not react on trap message, try to remove all filters, accept all SNMP Trap messages, then check what exactly data received

Regards
Alex

AndreT78 · Post by **AndreT78** » Wed Sep 16, 2020 8:40 am

Hi,

Thanks, I found my mistake with help from an other Trip Receiver Tool (UDP Port), but here is my next question about this.

How can I make a Filter with 2 OIDs?
1.3.6.1.4.1.31023.1.1.103 = Failed AND
1.3.6.1.4.1.31023.1.1.102 = Backup DC02-106

so i can add test for many different Veeam Backup Jobs.

With just one filter, I can't tell what caused the error when more than one job failed.

Thanks
BR Andre

KS-Soft · Post by **KS-Soft** » Wed Sep 16, 2020 10:05 am

Set option
- Counters fit expression ("%1.3.6.1.4.1.31023.1.1.103%" == "Failed") AND ("%1.3.6.1.4.1.31023.1.1.102%"=="Backup DC02-106")

Regards
Alex

AndreT78 · Post by **AndreT78** » Wed Sep 16, 2020 11:56 pm

Perfect

you are the best !!

KS-Soft · Post by **KS-Soft** » Thu Sep 17, 2020 7:26 am

You are welcome

Regards
Alex