KS-Soft

Hi Alex,

thanks for the great and fast help !

Regards
ttewes

Hi, we use HostMonitor 6.42c on MS Server 2003 HostMonitor runs as service. we use the "check NT EventLog" test. If a error occure HostMonitor must send the Description of the NT EventLog via sms. Our problem is that the Text in the Description is very long (over 500 characters) , that mea...

Great that was the reason, now the PDU Mode works also fine.

Thanks for your great help !!!


regards
ttewes

Thanks for you fast answer, but when I select PDU Mode there will no sms be send. The following entry is in the "SMS Test" Log: Sending... Com port open .. Ok GSM modem initialization .. Ok Error: Cannot send message to 0172*******. GSM modem error. No reply on AT command: AT+CMGS=24>00010...

I have send the GSM section at support@ks-soft.net

If we use the "SMS Test" , the sms looks also like:

AT+CMGS="0172*******" Test message


Regards
ttewes

Hi, we use HostMonitor 6.42c on MS Server 2003 HostMonitor runs as service. we want to use sms, but if HostMonito sends an sms the sms looks like: AT+CMGS="0172*******" drivespace down to 10GB but it should only send : drivespace down to 10GB we use a Nokia 6210 Mobilephone connected at Co...

Thanks for your fast help !

I doesn't have seen the entry in the FAQ's, sorry

regards
ttewes

Hi, we use HostMonitor 6.42c on MS Server 2003 HostMonitor runs at service. We make some "Traffic Monitor" tests. and sometimes the test status goes to unknown and the entry in the reply field is then: "Access violation at address 004CA194 in module 'hostmon.exe'. Read of address 0000...

Hi,

Because in our office there are 3 admins and we are using the Dashboard (with more than 500 test) on a Monitor that is 3 meters behind our Monitors, so it would be noticeable more.
particularly if there already some bad tests.

Regards
ttewes

That`s great !

Thanks for your help !!!!

Best Regards,
ttewes

Hi,

We use the Dashboard to have a quick overwiew.

It would be of great help for us if it possible that new bad events would flashing for N sec..

Regards,
ttewes

Could you start the EventViewer on the machine, when HostMonitor is running, please? Using menu "Action" > "Connect to another computer" you may connect to the machine, who generates mentioned event, and find the appropriate record. Do you see the properly description for this r...

Hello, i have searched for the problem and i found when i open the Event-File under C:\WINDOWS\system32\config\SysEvent.Evt with Notepad it contains the value: "R E A S O N = % % 4 1 3 0". When i save the Event File as "csv-File" there is the correct entry: "Reason = Authent...

Hi,

have you found some answer for my problem ??

Regards
ttewes

It is a 32-bit Windows Server 2003

Regards
ttewes