SSL cert check error

KS-Soft · Post by **KS-Soft** » Tue Oct 13, 2015 5:02 am

Just provide external IP address or hostname and make sure firewall does not block connection to port 443

Regards
Alex

RogerSpraggon · Post by **RogerSpraggon** » Tue Oct 13, 2015 3:41 pm

Our Host Monitor server is not directly accessible through firewall; we would need to define an external IP address for it and then a NAT rule through our firewall

KS-Soft · Post by **KS-Soft** » Tue Oct 13, 2015 4:19 pm

We don't need access to HostMonitor server.
Target server - the one you are trying to check.

Regards
Alex

RogerSpraggon · Post by **RogerSpraggon** » Tue Oct 13, 2015 4:34 pm

Again, no direct access.
if you use 210.215.138.196 it will take you to our proxy ADFS servers in our DMZ which then communicate with our internal ADFS servers that I am trying to certificate test; if I try to test our proxy AFS servers is still have a similar issue; will e-mail screen shot

KS-Soft · Post by **KS-Soft** » Wed Oct 14, 2015 8:50 am

Your server drops connection when HostMonitor tries to establish secure connection (even helo command not accepted)

Regards
Alex

sysadmber · Post by **sysadmber** » Thu Dec 10, 2015 4:31 am

Since update from hm 9.90 to 10.00 we face the same problem.

As are workaround i tested to use an agent instead but the result is:

"RMA: 301 - Cannot load SSL engine. Openssl libraries are required".

After this message i updated the rma and placed the openssl binaries from hm installation folder in rma dir.

libeay32.dll - 1.362.432 Byte 12.06.2015 Version 1.0.2c
ssleay32.dll - 357.888 Byte 12.06.2015 Version 1.0.2c

The error persists.

The test is for an internal and an external system. If you want the URI of the external system i can give it to you via PM.

KS-Soft Europe · Post by **KS-Soft Europe** » Thu Dec 10, 2015 10:24 am

Open SSL Libraries version is correct.
Please send host/port for your external system to support@ks-soft.net

KS-Soft · Post by **KS-Soft** » Mon Dec 21, 2015 2:12 pm

We made changes in new version, version 10.06 is able to check your server
http://www.ks-soft.net/hostmon.eng/news.htm

Regards
Alex

RogerSpraggon · Post by **RogerSpraggon** » Wed Jan 27, 2016 4:30 pm

Unknown Error: SSL cannot be initialized. WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
The above has started to come back on 3 of our systems (Barracuda Message Archiver Appliance, Barracuda Spam and Virus Firewall Appliance, and one of our IIS servers.
I can get it to go away by "reversing test"; refreshing test; un-reversing and refreshing test again but it comes back within a day.

KS-Soft · Post by **KS-Soft** » Wed Jan 27, 2016 5:12 pm

HostMonitor version?

>I can get it to go away by "reversing test"; refreshing test;

I don't see how "reverse alert" option can be related. I think simple refresh will work exactly the same way

Regards
Alex

RogerSpraggon · Post by **RogerSpraggon** » Wed Jan 27, 2016 6:15 pm

I know it seems odd but refresh doesn't work; reverse test returns "bad" and then un-reversing returns good

KS-Soft · Post by **KS-Soft** » Thu Jan 28, 2016 9:39 am

HostMonitor version?

RogerSpraggon · Post by **RogerSpraggon** » Thu Jan 28, 2016 3:15 pm

KS-Soft · Post by **KS-Soft** » Fri Jan 29, 2016 1:28 pm

Can you install 10.08?

Regards
Alex

RogerSpraggon · Post by **RogerSpraggon** » Sun Jan 31, 2016 4:03 pm

Have installed 10.08; will watch over next couple of days to see what happens

KS-Soft

SSL cert check error

Error: SSL cannot be initialized keeeps coming back

Refesh does not work