Test schedule problem?

fve · Post by **fve** » Fri May 07, 2010 3:52 am

I have one test and it must only run one time at week.

I made a "irregular schedule" Friday 05:00.
If the test fail I want it to switch to preform the test every 1 hour until it reply with good status. And then switch back to the originally "irregular schedule" Friday 05:00

Hope you understand? How do fix that?

KS-Soft · Post by **KS-Soft** » Fri May 07, 2010 7:45 am

Fix? What fix? Is there any error in our software?
If you want to change test interval, use "Change test interval" action

Regards
Alex

fve · Post by **fve** » Fri May 07, 2010 12:01 pm

Hi

Cool down

For me fix is: how do I do this.

Yes but in change test interval I cant select ex. every 10 min.?
If the test is setup to run only every Friday at 05:00, it will run! But if it fali "bad result" I want to change the interval to ex. every 1 hour until it change state="ok result" and then restore the old setting every Friday at 05:00.

Do you understand?

KS-Soft · Post by **KS-Soft** » Fri May 07, 2010 4:48 pm

Yes but in change test interval I cant select ex. every 10 min.?

Yes you can

Do you understand?

Yes, I understand.
"Change test interval" action allows you do to this. Unless you are using some very old version of the software, like 5 or 6

Regards
Alex