Problem sending SMS with Falcom Samba 75

[capella]

Hi!

I was so happy when I saw that the new Version of AHM (7.22) supported Falcom Samba 75 modem. Installed it but nothing cant send any sms via AHM... I running AHM on a WIN 2003 server and using the latest driver for the Falcom samba 75 modem (tried both the Vista driver and the XP driver). It is connected via USB and AHM finds it on COM3 this is the errors that I get

Sending
Com port open..Ok
Com port close..Ok

Error: Cannot send message to +46????????.GSM modem error. No reply on AT command:ATE1

Tried all the specified Baud rates from 110 - 256000 with both TEXT mode and PDU mode, but nothing:( please help me!

Thanks in advance

Capella

[KS-Soft Europe]

Error: Cannot send message to +46????????.GSM modem error. No reply on AT command:ATE1

Hm. It's a pity.
Ok. Lets try to figure out what is wrong. Have you tried PDU mode and 115200 baud rate?
Could you also try to test it with "WaveCom" and "Wavecom Fasttrack" modem type?

Before you start, could you try this KSGSMXLib.ocx library - http://www.ks-soft.net/download/test/ksgsmxlib.zip ? Please, stop HostMonitor, unzip attached file into HostMonitor's folder and start HostMonitor again.

Also I would ask you to perform the following steps:
1. Add HKEY_LOCAL_MACHINE\SOFTWARE\KS-Soft\GSMX registry key using registry editor.
2. Under this key, add the following DWORD values:
SMS_MT
SMS_DS
SMS_Indication
and fill them with 0 data.
3. Add GSMLogFile string value, and specify there some log file name(e.g. C:\HostMon\logs\at.log).
4. Restart HostMonitor and try to send test message again.

After that I would ask you to send the log file, specified in GSMLogFile registry value, to support@ks-soft.net

Regards,
Max

[capella]

Hi thanks for the answer!

Done everything you said but nothing, tried with Wavecom also! Done the registry key too but it dont write to the log file that I specified (C:\HostMon\logs\at.log) I dont know why.

I´m maby using the wrong driver, cant you send me the driver that is tested with AHM?

Regards Ivo

[KS-Soft Europe]

Done everything you said but nothing, tried with Wavecom also!

Have you tried both "WaveCom" and "Wavecom Fasttrack" modem types?

Done the registry key too but it dont write to the log file that I specified (C:\HostMon\logs\at.log) I dont know why.

Have you decompressed (unzipped) downloaded library? Probably, you should reregister it. Please try the following command in command line prompt:

Code: Select all

regsvr32 C:\PathToHostMonitor\KSGsmXLib.ocx

Note: instead of "PathToHostMonitor" you should specify proper path to new KSGsmXLib.ocx.

I´m maby using the wrong driver, cant you send me the driver that is tested with AHM?

Truth to say we have not tested Falcom Samba 75 in our environment. One of our customers reported he managed to get it working. We have been trying to contact him, but with no luck yet.

Regards,
Max

[capella]

Did everything you wrote! But no succsess:( Installed the software that came with the Falcom Samba 75 just to see if the software could send some sms, and it worked I´m sending sms on the same server and the same COM port 4 (usb-cable connected) with the software but not with/trought AHM:( I´m giving up for today!

Thanks for the support! If something else comes up please write it here!

Regards Ivo