New to Host Monitor and would like to set up tests to email me when the BackUp Exec service Stops or Starts and when a nightly backup job runs
successfully or fails. Can anyone offer suggestions. I have tried setting
up several variations of this test but none work exactly as I want them to.
Thanks in advance for any help that is provided me.
Sean
Set Up Monitoring of Backup Exec Service/Jobs via NTLog Test
There are various solutions: you may check text logs or setup Backup Exec to send SNMP Trap messages and use SNMP Trap test method to receive such messages.
More details available at
http://www.ks-soft.net/cgi-bin/phpBB/vi ... php?t=1183
Regards
Alex
More details available at
http://www.ks-soft.net/cgi-bin/phpBB/vi ... php?t=1183
Regards
Alex
-
- Posts: 2832
- Joined: Tue May 16, 2006 4:41 am
- Contact:
Re: Set Up Monitoring of Backup Exec Service/Jobs via NTLog
As I understand, you have tried to setup the "NT Event Log test" method, right? Could you explain what is wrong? Could you provide the settings, you have specified for the "NT Event Log" test method? What exact status does HostMonitor show for that particular test?compudox wrote:I have tried setting
up several variations of this test but none work exactly as I want them to.
Please note: HostMonitor changes test status to "Bad" only when it has found NEW event(s) that satisfies all specified requirements. If, after the next probe, the monitor does not find a new "Bad" event, it changes the test status to "Ok". http://www.ks-soft.net/hostmon.eng/mfra ... m#chkNTLog
Regards,
Max
My apologies for the delay in response.
Sanitized Test Settings are Below:
; ------- Test #01 -------
Method = NTLog
;--- Common properties ---
DestFolder = Root\XX CXXXXX\Hosts\Servers\FSC\
RMAgent = 192.168.XXX.X
Title = NTLog \\Host:Backup Exec Bad Status
Comment = NTLog \\Host:Backup Exec
RelatedURL =
ScheduleMode= Regular
Schedule = 7 Days, 24 Hours
Interval = 43200
Alerts = Send Service Status Bad Email
ReverseAlert= No
UnknownIsBad= Yes
WarningIsBad= Yes
UseCommonLog= Yes
PrivLogMode = Default
CommLogMode = Default
;--- Test specific properties ---
Computer = \\Host
Log = Application
Source = Backup Exec
Username = UserID
Password = Password
CheckComp = AnyFromList
CheckType = AnyFromList
CheckID = AnyFromList
CheckDescr = AnyFromList
CompList = ^M\\Host^M
TypeList = Error
TypeList = Warning
TypeList = Information
IDList = ^M34113^M57997^M
DescrList = ^MBackup Exec Alert: Service Stop^MBackup Exec Alert: Job Failed^M
ReportMode = LastEvent
The Backup Exec Job fails and no email is sent and the status stays at OK.
Also you state that the tests will only report on "Bad" events, so it will not report if the Service starts or the job completes successfully? Correct?
Thanks,
Sean
Sanitized Test Settings are Below:
; ------- Test #01 -------
Method = NTLog
;--- Common properties ---
DestFolder = Root\XX CXXXXX\Hosts\Servers\FSC\
RMAgent = 192.168.XXX.X
Title = NTLog \\Host:Backup Exec Bad Status
Comment = NTLog \\Host:Backup Exec
RelatedURL =
ScheduleMode= Regular
Schedule = 7 Days, 24 Hours
Interval = 43200
Alerts = Send Service Status Bad Email
ReverseAlert= No
UnknownIsBad= Yes
WarningIsBad= Yes
UseCommonLog= Yes
PrivLogMode = Default
CommLogMode = Default
;--- Test specific properties ---
Computer = \\Host
Log = Application
Source = Backup Exec
Username = UserID
Password = Password
CheckComp = AnyFromList
CheckType = AnyFromList
CheckID = AnyFromList
CheckDescr = AnyFromList
CompList = ^M\\Host^M
TypeList = Error
TypeList = Warning
TypeList = Information
IDList = ^M34113^M57997^M
DescrList = ^MBackup Exec Alert: Service Stop^MBackup Exec Alert: Job Failed^M
ReportMode = LastEvent
The Backup Exec Job fails and no email is sent and the status stays at OK.
Also you state that the tests will only report on "Bad" events, so it will not report if the Service starts or the job completes successfully? Correct?
Thanks,
Sean
1) I think there is mistake. As I know Backup Exec uses ID 57797 for "Service Stop" event (not 57997)The Backup Exec Job fails and no email is sent and the status stays at OK.
2) Also I think you may use "Description contains: Any text" filter mode. You are filtering events by ID, that ID identifies unique events so you don't need to check descriptions.
Not exactly.Also you state that the tests will only report on "Bad" events, so it will not report if the Service starts or the job completes successfully? Correct?
1) What event is "bad" and what event is "good", its up to you. You are the one who setup the filter.
2) We said "HostMonitor changes test status to Bad only when it has found NEW event(s) that satisfies all specified requirements." Keyword is "NEW". In other words, HostMonitor does not checks events that where recorded before you setup test.
Regards
Alex
This is what I use (have just come back into using HostMonitor literally today though, but this is what's been sitting in my tests for the past six months, alebit inactive):
This one was also in there, check once a day to see if the 'backup completed' event is NOT present:
Hope that this is of some use to you. Corrections, amendments and alternate versions welcome.
Code: Select all
Method = NTLog
;--- Common properties ---
;DestFolder = Root\
RMAgent = My SBS
Title = Backup failure
Comment = An event relating to failed backup is in the event log
RelatedURL =
ScheduleMode= Regular
Schedule = 7 Days, 24 Hours
Interval = 21600
Alerts = Message, Sound
ReverseAlert= No
UnknownIsBad= Yes
WarningIsBad= Yes
UseCommonLog= Yes
PrivLogMode = Full
CommLogMode = Default
;--- Test specific properties ---
Computer =
Log = Application
Source =
CheckComp = Any
CheckType = Any
CheckID = AnyFromList
CheckDescr = Any
CompList =
TypeList = Error
IDList = ^M34113^M34338^M57348^M58053^M57751^M34114^M58057^M34578^M
DescrList =
ReportMode = LastEvent
Code: Select all
Method = NTLog
;--- Common properties ---
;DestFolder = Root\
RMAgent = My SBS
Title = Missing 'backup completed' event
Comment = Event 34112 (backup completed successfully) not in app event log
RelatedURL =
ScheduleMode= OneTestPerDay
ScheduleTime= 09:00:00
Alerts = 'Backup complete' event missing
ReverseAlert= Yes
UnknownIsBad= Yes
WarningIsBad= Yes
UseCommonLog= Yes
PrivLogMode = Default
CommLogMode = Default
;--- Test specific properties ---
Computer =
Log = Application
Source =
CheckComp = Any
CheckType = Any
CheckID = AnyFromList
CheckDescr = Any
CompList =
TypeList = Information
IDList = ^M34112^M
DescrList =
ReportMode = LastEvent