traffic monitor

[thomasschmeidl]

Hi Alex,

some questions about traffic monitor test:

1: what OIDs does the traffic monitor use for the various tests offered?

2: when you choose "on all interfaces" I assume that there will be as many SNMP GETs as there are active interfaces - right?

3.: Is it possible to monitor "Broadcasts on all interfaces" (.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInNUcastPkts)?

Regards

Thomas

[KS-Soft]

1: what OIDs does the traffic monitor use for the various tests offered?

1.3.6.1.2.1.2.2.1.10 oidifInOctets
1.3.6.1.2.1.2.2.1.13 oidifInDiscards
1.3.6.1.2.1.2.2.1.14 oidifInErrors
1.3.6.1.2.1.2.2.1.15 oidifInUnknownProt
1.3.6.1.2.1.2.2.1.16 oidifOutOctets
1.3.6.1.2.1.2.2.1.19 oidifOutDiscards
1.3.6.1.2.1.2.2.1.20 oidifOutErrors
1.3.6.1.2.1.2.2.1.21 oidifOutQLen

2: when you choose "on all interfaces" I assume that there will be as many SNMP GETs as there are active interfaces - right?

Depends. E.g. if you are using "alert if In/Out traffic ..." option and your device has N network interfaces, HostMonitor will perform 2+N*2 requests

3.: Is it possible to monitor "Broadcasts on all interfaces" (.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInNUcastPkts)?

Sorry, HostMonitor does not provide such option

Regards
Alex

[thomasschmeidl]

Thank you very much for your prompt reply, Alex,

Regards

Thomas

[KS-Soft]

You are welcome