KS-Soft. Network Management Solutions
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log inLog in 

Reports aren't generated as configured on the Folder Setting

 
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting
View previous topic :: View next topic  
Author Message
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Wed Nov 02, 2016 1:04 am    Post subject: Reports aren't generated as configured on the Folder Setting Reply with quote

Hello,

I've the problem that reports aren't generated in the interval, which is configured at the test folder, if host monitor is closed and running as a service.

I've set the setting "generate reports every" to 10 minutes and no reports is generated.

When I run the software under the same account as configured for the service the reports are generated.

It too works on demand if i click generate reports now.

Thanks for your help!
Kind Regards,
Sebastian
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Wed Nov 02, 2016 4:42 am    Post subject: Reply with quote

HostMonitor version?
Windows? Service Pack?
What error do you see in HostMonitor system log file?

May be you are using mapped network drive for the report?
Services do no have access to mapped drives.
You may specify UNC path (e.g. \\server1\share1\reports\rep01.htm) but we recommend to use local drive for reports and log files

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Mon Nov 07, 2016 10:22 am    Post subject: Reply with quote

KS-Soft wrote:
HostMonitor version?
Hostmonitor Version is 9.9

Windows? Service Pack?
Windows Server 2012 R2

What error do you see in HostMonitor system log file?

If running as a Service, I'm getting no entry in the log file.
If running the application as user I'm getting the report and the following in the log file:
HTML report created (file: C:\Inetpub\wwwroot\Kunden\...)


May be you are using mapped network drive for the report?

No I'm using a local drive

Services do no have access to mapped drives.
You may specify UNC path (e.g. \\server1\share1\reports\rep01.htm) but we recommend to use local drive for reports and log files

Regards
Alex
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Mon Nov 07, 2016 12:08 pm    Post subject: Reply with quote

Could you check for errors once more using menu View->Auditing Tool->Recent syslog?

>I'm getting no entry in the log file.

May we see the file?
Can you setup reports using path like C:\ProgramData\HostMonitor\Logs? Still no reports and no errors?

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Tue Nov 08, 2016 3:53 am    Post subject: Reply with quote

KS-Soft wrote:
Could you check for errors once more using menu View->Auditing Tool->Recent syslog?

Theres not more listed as in the syslog file.

>I'm getting no entry in the log file.

May we see the file?

Here are the last entries of the log file:
That was with the application running and with service stopped:

[08.11.2016 10:16:51] Sys Action info: New interval for test "Disk - C:\> []" has been set
[08.11.2016 10:16:51] Sys Action info: New interval for test "Ping an [] - Intern" has been set
[08.11.2016 10:16:51] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:51] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:51] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:52] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:53] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:53] Sys HTML report created (file: C:\Inetpub\wwwroot\XXXXX\DemoServer.htm)
[08.11.2016 10:16:53] Sys HTML report created (file: C:\Inetpub\wwwroot\XXXXX\DemoServerFehler.htm)
[08.11.2016 10:16:53] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:53] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:53] Sys Action info: New interval for test ": has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test " has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test " has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:54] Sys Action info: New interval for test "" has been set
[08.11.2016 10:16:54] Sys RMA X.X.X.X: Connection rejected

Than I've closed the program and the service was startetd again, no more reports are generated.


Can you setup reports using path like C:\ProgramData\HostMonitor\Logs? Still no reports and no errors?

Then I've set the report path to C:\ProgramData\HostMonitor\Logs:


Again, since the program was running, no problem, the reports were generated, as you can see at the first two lines:

[08.11.2016 10:27:55] Sys HTML report created (file: C:\ProgramData\HostMonitor\Logs\DemoServer.htm)
[08.11.2016 10:27:55] Sys HTML report created (file: C:\ProgramData\HostMonitor\Logs\DemoServerFehler.htm)
[08.11.2016 10:27:55] Sys Action info: New interval for test "Gateway -APA (ext. <--> Wien)" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:55] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:27:55] Sys Action info: New interval for test " has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Action info: New interval for test "" has been set
[08.11.2016 10:27:56] Sys Monitor stopped
[08.11.2016 10:27:56] Sys RCI disabled
[08.11.2016 10:27:56] Sys RMA Server disabled
[08.11.2016 10:28:00] Sys RCI enabled
[08.11.2016 10:28:00] Sys RMA Server enabled
[08.11.2016 10:28:11] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:28:25] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:28:41] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:28:55] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:29:11] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:29:25] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:29:41] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:29:55] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:30:00] Sys Monitor started
[08.11.2016 10:30:11] Sys RMA X.X.X.X: Connection rejected
[08.11.2016 10:30:25] Sys RMA X.X.X.X: Connection rejected


https://www.dropbox.com/s/o6x5iypcl20xdn3/hostmon.jpg?dl=0]

Thank you!
Regards,
Sebastian

Regards
Alex
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Tue Nov 08, 2016 11:47 am    Post subject: Reply with quote

We cannot reproduce the problem.
Also, we do not understand why you do not see error in the log. If HostMonitor cannot create report, it records "report creation error..."

Unless you did not wait long enough?
------
[08.11.2016 10:28:00] Sys RMA Server enabled
[08.11.2016 10:30:00] Sys Monitor started
[08.11.2016 10:30:25] Sys RMA X.X.X.X: Connection rejected
------
Looks like HostMonitor needs 2 minutes to load all settings (huge test list? then version 10.00 should help, it works faster, next version will work even faster).
This means report should be created around 10:31:30
Any log records around this time?

Another possible reason - service and application use different config files (located in different folders).
What path did you use for config files during installation?
Default C:\ProgramData\HostMontor\ ?
or something like C:\Program Files (x86)\HostMonitor ?
Could you connect to HostMonitor service using RCC and check settings?

btw: you have installed some Active RMA agent but did not configure HostMonitor to accept connections from this agent.
If you don't need agent, just stop it.

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Wed Nov 09, 2016 3:48 am    Post subject: Reply with quote

KS-Soft wrote:
We cannot reproduce the problem.
Also, we do not understand why you do not see error in the log. If HostMonitor cannot create report, it records "report creation error..."

That is what I too do not understand, seems that the service is not even executing the command for creating the reports.

Unless you did not wait long enough?
------
[08.11.2016 10:28:00] Sys RMA Server enabled
[08.11.2016 10:30:00] Sys Monitor started
[08.11.2016 10:30:25] Sys RMA X.X.X.X: Connection rejected
------
Looks like HostMonitor needs 2 minutes to load all settings (huge test list? then version 10.00 should help, it works faster, next version will work even faster).
This means report should be created around 10:31:30
Any log records around this time?

No, no records, I guess the 2 minutes are because the service is set to wait for 2 minutes in the Hostmonitor application.

Another possible reason - service and application use different config files (located in different folders).
What path did you use for config files during installation?
Default C:\ProgramData\HostMontor\ ?
or something like C:\Program Files (x86)\HostMonitor ?

The path is C:\Program Files\HostMonitor


Could you connect to HostMonitor service using RCC and check settings?

How can I connect to the HostMonitor service with RCC? If I open the RCC and try to connect to the localhost it it not possible.

btw: you have installed some Active RMA agent but did not configure HostMonitor to accept connections from this agent.
If you don't need agent, just stop it.

We have configured 3 RMA agents and one local RMA agent, if I have a look at the RMA Manager the status of all 4 is connected.
In the Hostmonitor application the three IP addresses of the external RMA agents are accepted under Active RMA.


The problem is, I've not setup up the Hostmonitor, it was a collegaue who is not in our firm anymore.
Can I send you any config files or something to get behind the problem?


Thank you!
Kind Regards,
Sebastian


Regards
Alex
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Wed Nov 09, 2016 9:15 am    Post subject: Reply with quote

Quote:
The path is C:\Program Files\HostMonitor

virtual files problem - to keep legacy apps running, Windows (starting from Vista) pretends to write to specified file locations, but when you go to look for those files, you won't find them because Windows actually stores the files in a "Virtual Store" under the AppData store in your user folder.

C:\Program Files\HostMonitor\ is bad location for config files - when you start application and service, HostMonitor may use different config files without knowing that.
Default installation path for config files C:\ProgramData\HostMonitor.

In your case I would recommend to use only one mode: either application or service.

Another possible solution, backup config files (*.LST, *.HML, *.INI), reinstall software using Install mode (not Update/Repair) and default path for config files, restore ALL config files (*.LST, *.HML, *.INI) into new data folder, start HostMonitor and adjust some settings (e.g. change path to reports and logs from c:\program files\ to c:\programdata\)
Make sure you backup correct config files, as you may have several sets now...

Quote:
How can I connect to the HostMonitor service with RCC? If I open the RCC and try to connect to the localhost it it not possible.

What exactly means "not possible"?
What error do you see?
Have you enabled RCI interface? setup user account, allowed remote or local connections? used this account and correct password?

Quote:
We have configured 3 RMA agents and one local RMA agent, if I have a look at the RMA Manager the status of all 4 is connected.

Well, there is some other agent tries to connect. You see its IP in the log so you may check that system and stop/uninstall agent.

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Mon Nov 14, 2016 9:46 am    Post subject: Reply with quote

Thanks for your help!
I will try to reinstall and I'll give you feedback!
Back to top
View user's profile Send private message
sebirello



Joined: 02 Nov 2016
Posts: 25

PostPosted: Tue May 23, 2017 6:40 am    Post subject: Reply with quote

Hi, sorry for my late feedback, after reinstalling it works like a charm . Thank you very much!
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Tue May 23, 2017 7:29 am    Post subject: Reply with quote

You are welcome

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

KS-Soft Forum Index