Hello I have recently downloaded "ip tools" and have it on my 2k server. Is there any way to specifically monitor just one of the ip's i have connected to this server.
I have 23 connections on this particular server i want to monitor just one, i tried playing with the filters, but didn't get very far. Any help in clearing this situation up would be greatly appreciated.
specific ip's
-
- Posts: 2832
- Joined: Tue May 16, 2006 4:41 am
- Contact:
As I understand, you are talking about "Connections" tab, right? If you want to monitor particular connection from certain IP-address only, you have to use "Filter" options, located in "Connections" tab of the "Options" dialog. Quote from the manual:
http://www.ks-soft.net/ip-tools.eng/mfr ... onnections
=================================
# Address filter
Specify the addresses (or address ranges) you want to appear on or to be excluded from the list of current connections. Enter each address or a range of addresses on a separate line, as in the example below:
192.26.74.15
194.16.15.1 - 194.16.15.48
# Apply for
Specify whether the filter should be applied to the remote or local address, or to both.
=================================
Regards,
Max
http://www.ks-soft.net/ip-tools.eng/mfr ... onnections
=================================
# Address filter
Specify the addresses (or address ranges) you want to appear on or to be excluded from the list of current connections. Enter each address or a range of addresses on a separate line, as in the example below:
192.26.74.15
194.16.15.1 - 194.16.15.48
# Apply for
Specify whether the filter should be applied to the remote or local address, or to both.
=================================
Regards,
Max
-
- Posts: 2
- Joined: Tue Oct 02, 2007 8:37 am
-
- Posts: 2832
- Joined: Tue May 16, 2006 4:41 am
- Contact:
Yes, version 1.93 is pretty old. The latest version is 2.50. Available at our site: http://www.ks-soft.net/ip-tools.eng/downpage.htm
Regards,
Max
Regards,
Max