problem using with a Falcom Samba 75

capella · Joined: 04 Jul 2007 Posts: 5 Location: Sweden

Hello my friends!

I have AHM 6,80 and I have problem using a Falcom Samba 75 GSM modem... I know that the Samba is not on the List for supported Modems or Cellphones...But with your help I mabye can get it to work... It is a USB modem. I´m using COM PORT3 and this is the message that I´ll got using the
Z-text SMS modem...Have tried all the modem types without any luck.! And almost with the same ERROR messages. Do you have any idea our shall I just buy another modem??? Thanks in advance!

Sending...
Com port open .. Ok
Com port close .. Ok
Error: Cannot send message to +46704???????. GSM modem error. ERROR was returned on AT command: AT+CPIN?

KS-Soft · Joined: 03 Apr 2002 Posts: 12795 Location: USA

What baud rate do you use? 19200? Do you use PDU or Text mode?
If you are using 19200 baud rate and both modes does not work, please send request to support@ks-soft.net. We will provide test program to collect more diagnostics information.

Regards
Alex

capella · Joined: 04 Jul 2007 Posts: 5 Location: Sweden

Thanks Alex! I ´ll send them a e-mail, and w´ll see what they say.

Using Baud Rate: 19200 tried both PDU and TEXT doesn´t work:(