Change period from daily to mins/secs etc

RicochetPeter · Post by **RicochetPeter** » Tue May 22, 2007 6:24 am

Hi folks,

I have a test, which runs at 13.00h each day. Now I also have an action profile in which I would like to change the test interval to 10minutes when "bad" state is entered.

Problem is: as "daily at 13.00h" is an "irregular" schedule, the change isn't performed.

Any ideas/workarounds?

KS-Soft · Post by **KS-Soft** » Tue May 22, 2007 7:38 am

You are the first customer who wants to mix irregular and regular schedules for the same test.
H'm... the only solution I see - use HMScript action with ImportFromFile command to import (modify) test settings.
http://www.ks-soft.net/hostmon.eng/mfra ... #actScript
Import file should contain "ImportMode = Modify" command
http://www.ks-soft.net/hostmon.eng/examples/import1.htm

Regards
Alex

rc · Post by rc » Wed May 30, 2007 1:45 am

Hi Alex,

I have experienced the same problem with my standard alert profile (2500 tests). I need for example 3 consecutive "Bad" results to send Email to admin. Test interval will set to 1 min after 1 "Bad result" and restore to original after 1 "Good" result.
Some File Integrity tests will execute only one's a day, but on fault the admin needs the information immediately and not after 2 days.
In the moment I need a second alert profile to do this.

I will be nice if I could use the same action profile for all tests.

Regards
Enrico

KS-Soft · Post by **KS-Soft** » Wed May 30, 2007 7:59 am

Ok, I have added medium priority task

Regards
Alex

RicochetPeter · Post by **RicochetPeter** » Thu May 31, 2007 6:07 am

KS-Soft wrote:Ok, I have added medium priority task

Regards
Alex

Very nice

Many Kudos to you guys!