Recommended Temperature Probes?

kvnsdr · Joined: 09 Apr 2004 Posts: 47

Which Temperature Monitors on the following link work well with Host Monitor 5.30?

https://secure.sensatronics.com/store/sunshop/index.php?action=category&id=11

KS-Soft · Joined: 03 Apr 2002 Posts: 12795 Location: USA

Version 5.30 works with E4, E16, EM1 devices. But there is one mistake - HM does not calculate Min/Max/Average Reply counters. It was fixed in version 5.34
Version 5.60 supports model CM16

I am not sure what the difference between model E16 and E16 International. You should ask Sensatronics.

Regards
Alex

kvnsdr · Joined: 09 Apr 2004 Posts: 47

Thank You.........

amolsawarkar · Joined: 11 May 2003 Posts: 8

Alex,

I can see there is U4 available with all similar features. Is this compatible with HM 5.92 and RMA 3.5?

Amol

KS-Soft · Joined: 03 Apr 2002 Posts: 12795 Location: USA

U4? Universal Temperature Monitor, 4 probes? Version 5.92 does not support this unit. Version 6.00 does.

Regards
Alex

Steven · Joined: 16 Feb 2006 Posts: 44

Sadly, we have already chosen another temperature/environmental control system. What are the chances that other products such as our "weathergoose" ( http://www.itwatchdogs.com/products.shtml ) will be supported in the future? Otherwise, are there any specific caveats to watch for when trying to use SNMP to send alerts from hostmon? We only have the standard hostmon (no MIB browser). Thanx for any information you can provide.

KS-Soft · Joined: 03 Apr 2002 Posts: 12795 Location: USA

As I see WeatherGoose and SuperGoose support SNMP protocol, so you can use HostMonitor to perform SNMP Get test method.

Steven · Joined: 16 Feb 2006 Posts: 44

That's what I was hoping for. Thanx

thomasschmeidl · Joined: 15 Apr 2006 Posts: 166 Location: Germany, Bavaria

Hi Steven,

the "weathergoose" seems quite interesting to us, too (more versatile, 19"-mount, ...)

How long do use the goose?
What experiences did you make?

Regards

Thomas

Steven · Joined: 16 Feb 2006 Posts: 44

Thomas, sorry for not responding. Had not realized anyone was posting here still.

We have just purchased it and only have it set up these past 3 months or so. Also, we have nothing to compare it to. We bought an IP Camera to go with it and it works well too, after updating the firmware. But, we cannot get it to e-mail us alerts when the camera triggers on motion. Have not taken the time to work with their support on this issue yet either. If we do, I'll try to remember to post something here.