Alert to phone by playing a .wav file

KS-Soft Europe · Post by **KS-Soft Europe** » Thu Feb 26, 2009 11:03 am

Yesterday we sent you modified playcall utility. Have you received it? Have you tried it?

Regards,
Max

binaer · Post by **binaer** » Sun May 17, 2009 4:16 pm

Hi

sorry for very delayed response. I'll test your File in the next few days again and will send you a Screenshot back. There were some devices listed, but not one works...

binaer · Post by **binaer** » Thu May 21, 2009 1:26 am

Hi

here's the output:

playcall.exe -enumtapidevices
+-¦¦¦-------------------------------------------------------------------------À
¦ PlayCall ¦ Version 0.10 ¦ EMail: line1@ks-soft.net ¦
¦ License: Freeware ¦ July, 2006 ¦ Web: www.ks-soft.net ¦
È-----------------------------------------------------------------------------+
Purpose: calls specified phone number and plays wav file using voice modem

Standard 56000 bps Modem
AVM ISDN - ISDN (X.75)
AVM ISDN FAX (G3)
AVM ISDN Analog Modem (V.32bis)
AVM ISDN BTX
AVM ISDN Custom Config

KS-Soft Europe · Post by **KS-Soft Europe** » Thu May 28, 2009 6:37 am

Sorry for delay.
Well, there are several devices in the list.
So, you may take it one by one specify as TAPIDeviceName parameter in "[General]" section of playcall.ini file. e.g.:

Code: Select all

TAPIDeviceName= Standard 56000 bps Modem

or

Code: Select all

TAPIDeviceName= ISDN (X.75)

Actually, you may use standard Windows "Hyper Terminal" utility, connect to each device and try AT+FCLASS=? command. A modem supporting voice will respond with a comma-delimited list of numbers that includes the number 8 (e.g. 0,1,8)

Regards,
Max

KS-Soft Europe · Post by **KS-Soft Europe** » Thu May 28, 2009 1:14 pm

P.S. A bit updated playcall utility available here: http://www.ks-soft.net/download/test/playcall012.zip

Regards,
Max

binaer · Post by **binaer** » Thu May 28, 2009 10:46 pm

Hi

I found another solution which I can do nearly all things, I can with playcall:
http://www.phoner.de/

except recall, if no answer. But I made a little Batch-Script which helps me for this...

Back to playcall.exe:
in the new Version, -enumtapidevices doesn't work anymore... your other Tests, I haven't yet performed. Maybe, after the Weekend. I'll post asap, but can be a little delay...