KS-Soft. Network Management Solutions
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log inLog in 

RCI and Web Service Problem

 
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting
View previous topic :: View next topic  
Author Message
rianb



Joined: 08 Jun 2004
Posts: 4

PostPosted: Tue Jun 08, 2004 5:11 pm    Post subject: RCI and Web Service Problem Reply with quote

Hi,

I have been running HM 4.42 Eval for a few days now and really like all the features. I will be purchasing a license but I can't seem to get the Web Service to work.

Both HM and Web Service is installed on the same box for testing. (Win XP Pro SP1 fully patched. IIS not installed)

RCI is "Enabled" and listening on port 27. (tried many different ports with no luck)
Web Service is running as a server and also set to port 27. When connecting with a browser I get the Username/password box and then login as Admin. ( Also created more users...)
This is want I get I the "RCI Status" window:

5:57:33 PM IP Connection from 127.0.0.1 .. Accepted
5:55:24 PM RCI enabled


In the browser I get this:
-----------
Response from Hostmonitor's Web Service:
Transmission error (Web Service <-> HostMonitor): "Connection error"

--------------------------------------------------------------------------------

Possible reasons:
- HostMonitor is not running
- RCI interface disabled
- HM Web Service configured incorrectly (wrong TCP Port or IP address)
- network problem
------------

I an not seeing any error logs and have tried connecting as a different user and from different machines on the same network. Same error message every time.
There is no software Firewalls installed on this box and AV is NOD32.

Is the ANYTHING else I can troubleshoot to get the web service working? I really like HM and would prefer purchasing it for my company rather than the other program we are also evaluating.

Thanks in advance!
RB
Back to top
View user's profile Send private message Visit poster's website
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Wed Jun 09, 2004 2:35 pm    Post subject: Reply with quote

H'm...
Quote:

5:57:33 PM IP Connection from 127.0.0.1 .. Accepted
5:55:24 PM RCI enabled


It means that TCP connection was accepted. Also it means HostMonitor did not receive complette request from Web Service within specified timeout.
If HostMonitor receive request from Web Service it displays another message (it could be error message e.g. "Invalid user name or password" or it could be confirmation message).
Its strange.

Could you check system log (you may use menu "View"->"System log"). I assume you will not see any error message there but ... just in case.
What connection paramets do you use? Timeout, Maximum simultaneous connections? Could you send hostmon.ini and webservice.ini files to support@ks-soft.net?

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
rianb



Joined: 08 Jun 2004
Posts: 4

PostPosted: Wed Jun 09, 2004 3:11 pm    Post subject: Files Reply with quote

Thanks for the quick reply Alex. I just sent you the requested .ini and syslog file since there were entries in it.

Thanks!
RB
Back to top
View user's profile Send private message Visit poster's website
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Thu Jun 10, 2004 1:41 pm    Post subject: Reply with quote

Settings look correctly.. I changed just one parameter (address of my HostMonitor system) and it works.
But as I see you have started Web Service in service mode? Of course it should work in this mode, but.. Could you start it as application? Just for testing purpose. Also you have installed Web Service and HostMonitor on the same system, could you change address to 127.0.0.1? Just for testing.

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
rianb



Joined: 08 Jun 2004
Posts: 4

PostPosted: Thu Jun 10, 2004 3:55 pm    Post subject: Reply with quote

Hi Alex,

Again thank you for the quick replies! I am really stumped here. Changed the Web Service to run as an application and set it back to 127.0.0.1
No luck, still the same error message. (Updated files sent by e-mail)

Just to confirm: Where do you change the IP for HostMonitor? I can see where to change port settings but not for an IP?

Also I have Proxomitron Naoko 4.4 on the test system but it is disabled and would normally listen on 127.0.0.1:8080. The browsers I am testing with are all set to not use a Proxy.

4:37:03 PM IP Connection from 127.0.0.1 .. Accepted
4:36:07 PM IP Connection from 127.0.0.1 .. Accepted
4:36:07 PM IP Connection from 127.0.0.1 .. Accepted
4:35:20 PM RCI enabled


Looking forward to any suggestions you might have....

Thanks,
RB
Back to top
View user's profile Send private message Visit poster's website
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Thu Jun 10, 2004 4:30 pm    Post subject: Reply with quote

Rian,

Quote:
Just to confirm: Where do you change the IP for HostMonitor? I can see where to change port settings but not for an IP?


You already changed IP. Its displayed on main form of Web Service.

Quote:
Also I have Proxomitron Naoko 4.4 on the test system but it is disabled and would normally listen on 127.0.0.1:8080. The browsers I am testing with are all set to not use a Proxy.


I checked your ini files again - all settings are correct.
Why HostMonitor receives TCP connection but does not receive request? I
don't have any idea I will check code again....
Do you have some other system that you can use for testing?

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
rianb



Joined: 08 Jun 2004
Posts: 4

PostPosted: Mon Jun 14, 2004 11:31 pm    Post subject: Reply with quote

Quote:
Do you have some other system that you can use for testing?

Regards
Alex


Hi Alex,

I just installed HostMonitor eval to my Windows 2000 Server. I get exactly the same error message as on the XP box. Again Web Service and HM is installed on the same server....

What else can I check?

Thanks,
RB
Back to top
View user's profile Send private message Visit poster's website
KS-Soft



Joined: 03 Apr 2002
Posts: 12792
Location: USA

PostPosted: Tue Jun 15, 2004 3:52 pm    Post subject: Reply with quote

The same antivirus system is running on both systems?
Could you temporarily disable it?

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

KS-Soft Forum Index