View previous topic :: View next topic |
Author |
Message |
jakeyboy
Joined: 05 Dec 2003 Posts: 3
|
Posted: Fri Dec 05, 2003 3:48 pm Post subject: please help -> Telnet problem + netBIOS problem... |
|
|
Hi all, i'm a newbie to IP-tools, (i know basic stuff about ip address etc anyway)
the problems i'm having are: -
1) netBIOS - when i type in an ip address, i just get something like this
GetStatus (Machine : xx.xx.xx.xx Interface : 27) .. Result : ncb_lana_num field invalid
i dont know what to put in the "Interface num" or whatever, please can someone explain all this to me.
2) Telnet - using in general...
when i type in an ip and port, it will connect (conection established displays).
Then when i type "Help" or anything else to bring up a list of commands it come up with session closed straight away.
PLEASE HELP!!!
thanks in advance |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12802 Location: USA
|
Posted: Fri Dec 05, 2003 7:11 pm Post subject: |
|
|
Quote: | GetStatus (Machine : xx.xx.xx.xx Interface : 27) .. Result : ncb_lana_num field invalid
i dont know what to put in the "Interface num" or whatever, please can someone explain all this to me. |
It depends on systems, different computers has different interfaces. Many of them does not support NetBIOS protocol at all. You can specify range of interfaces (e.g. 0-11), IP-Tools will try to use all of them.
Quote: | 2) Telnet - using in general...
when i type in an ip and port, it will connect (conection established displays).
Then when i type "Help" or anything else to bring up a list of commands it come up with session closed straight away. |
What port/service do you use? Some servers/services support Help command, some doesn't
Regards
Alex |
|
Back to top |
|
|
jakeyboy
Joined: 05 Dec 2003 Posts: 3
|
Posted: Sun Dec 07, 2003 12:46 pm Post subject: |
|
|
Ummn i dont kno what you mean in port/service...
it doesnt matter what i type tho...
the only telnet thing i got working was snowplains. |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12802 Location: USA
|
Posted: Sun Dec 07, 2003 2:17 pm Post subject: |
|
|
When you use telnet utility you specify host and port. Right? What port do you use?
Regards
Alex |
|
Back to top |
|
|
jakeyboy
Joined: 05 Dec 2003 Posts: 3
|
Posted: Sun Dec 07, 2003 2:49 pm Post subject: |
|
|
80 |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12802 Location: USA
|
Posted: Sun Dec 07, 2003 3:42 pm Post subject: |
|
|
80 port used by HTTP protocol (web server). Web servers do not support HELP command and usually web servers drop connection after each received request. HTTP server supports HEAD, GET, POST, PUT and some other commands.
If you want to check how HTTP server works, you don't need to use Telnet utility, use HTTP Client utility (introduced in IP-Tools version 2.20)
Regards
Alex |
|
Back to top |
|
|
|