KS-Soft. Network Management Solutions
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log inLog in 

RMA 301 - Access is denied

 
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting
View previous topic :: View next topic  
Author Message
senor_v



Joined: 21 Feb 2023
Posts: 5

PostPosted: Tue Feb 21, 2023 6:43 am    Post subject: RMA 301 - Access is denied Reply with quote

Hello
we have the following setup:
Remote Control Console Version 8.04 for HostMonitor - there we set up a test (test method: check service, target host is a Windows Server 2008 R2 Standard machine with a local user "Monitor" (with permissions to log on as a service on the target host - in the test we have entered the user credentials of the monitoring user). Services KS Remote Monitoring agent and Remote Registry services are started, and we want to test if the service "FileZilla" on the target host is running (which it is)

Agent is on a Windows Server 2019 Build 17763
Agent: KS Remote Monitoring Agent
Version: 6.54

When we run the test, we get "RMA 301 - Access is denied"
The two machines are not in the same domain but in the same IP range
All the other tests - CPU, disk space, ping, etc. - are working
Can anyone offer some assistance?
Thanks
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12791
Location: USA

PostPosted: Tue Feb 21, 2023 8:21 am    Post subject: Reply with quote

RCC (Remote Control Console) does not need any permissions. It does not perform tests, it just shows data retrieved by HostMonitor or RMA agents.
So you should assign these permissions to RMA agent (I assume its running as service?)

Also in some cases its necessary to provide user account using Connection Manager, especially when you are trying to monitor system in another domain, or non-domain member.
Also required for Drive Free Space tests, WMI, Dominant Process..
https://www.ks-soft.net/hostmon.eng/mframe.htm#profiles.htm#conmgr

Quote:
When we run the test, we get "RMA 301 - Access is denied"
The two machines are not in the same domain but in the same IP range

two machines means RMA system (systemA) and target system with service you want to test (systemB)?
We recommend to install RMA agent in each domain you are monitoring.

Quote:
All the other tests - CPU, disk space, ping, etc. - are working

Ping does not require any permissions.
CPU requires "Performance Monitor" rights.
Service test - depends on "Alert mode". I assume you are using "Alert when service not started or does not respond" mode?

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
senor_v



Joined: 21 Feb 2023
Posts: 5

PostPosted: Tue Feb 21, 2023 10:32 am    Post subject: Reply with quote

Yes, you are right. I might have looked at the wrong F1 screen.
We already solved the problem by testing for processes running, not services running. For processes it worked like a charm, for services it gave us an error.
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12791
Location: USA

PostPosted: Tue Feb 21, 2023 10:45 am    Post subject: Reply with quote

What test mode do you use for Service test?
RMA started as service? or application?
RMA runs in DomainA and checks system located in different domainB?
RMA runs under account then owns "Log on as a Service" permission?
Connection Manager does not have record related to target system?

Process test does not check if Process hung and does not respond.

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
senor_v



Joined: 21 Feb 2023
Posts: 5

PostPosted: Wed Feb 22, 2023 2:34 am    Post subject: Reply with quote

Hello
1.) "Service not started or does not respond"
2.) as a service (but we tried it as application as well)
3.)yes
4.) yes
5.) in the Connection Manager I have 9 entries for agent "any"
Under resource column, I see unrelated server names/IP adresses
i.e. the target host is not among them
Thanks
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 12791
Location: USA

PostPosted: Wed Feb 22, 2023 4:37 am    Post subject: Reply with quote

I would suggest to
- use another RMA installed in DomainB in order to monitor all systems within DomainB
- correct Connection Manager records

Regards
Alex
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KS-Soft Forum Index -> Configuration, Maintenance, Troubleshooting All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

KS-Soft Forum Index