View previous topic :: View next topic |
Author |
Message |
chri
Joined: 09 Mar 2009 Posts: 19
|
Posted: Mon Sep 20, 2021 3:49 am Post subject: CurrentStatusDuration |
|
|
Hi,
Didn't find anything regarding CPU usage tests and Tune up Reply.
We wan't to monitor the cpu of a system and Hm should not always getting Red if the cpu is shortly @ 99%.
So the question is how can we tune up the reply, it should wait about 5 minutes and in the meanwhile set the status Warning and after this 5 min. period he should set the Bad status.
thanks in upfront
christian |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12795 Location: USA
|
Posted: Mon Sep 20, 2021 5:08 am Post subject: |
|
|
Quote from the manual
Example #3: You need to monitor a device that works unreliably - often changes its status from "good" to "bad" and vice versa and you want to be alerted when the device definitely is "dead", not just lost network connection for a minute. Then you may enable "Treat Warning status as Bad", mark "Use Warning status" option and use expression like ('%SuggestedSimpleStatus%'=='DOWN') and (%SuggestedRecurrences%<4). In such case HostMonitor will use Warning status for initial 3 failed probes and change status to Bad after 4th failed check.
Regards
Alex |
|
Back to top |
|
|
chri
Joined: 09 Mar 2009 Posts: 19
|
Posted: Mon Sep 20, 2021 5:52 am Post subject: |
|
|
many thanks Alex, works like a charm! |
|
Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002 Posts: 12795 Location: USA
|
Posted: Mon Sep 20, 2021 6:15 am Post subject: |
|
|
You are welcome
Regards
Alex |
|
Back to top |
|
|
|