KS-Soft. Network Management Solutions
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log inLog in 

SNMP Tests for HPE MSA P2000 Storage

 
Post new topic   Reply to topic    KS-Soft Forum Index -> Other
View previous topic :: View next topic  
Author Message
itelio



Joined: 06 Nov 2014
Posts: 30

PostPosted: Thu Nov 30, 2017 3:40 am    Post subject: SNMP Tests for HPE MSA P2000 Storage Reply with quote

Hello,
The overall status of the P2000 would have to be the "Overall Unit Status".
I take the description that this sensor message reflects this status or do I see it wrong? The Mibbrowser returns the status as OK.

https://imgur.com/1JpEkXb

But this is the Status of the Sensor itself.
I need the Return Value of the Sensor.

Does anyone have experience with the monitoring of P2000 or MSA2040?

regards
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 11822
Location: USA

PostPosted: Thu Nov 30, 2017 6:36 am    Post subject: Reply with quote

Could you please provide MIB file instead of the image?
(support@ks-soft.net)

As I understand this device does not support iLO, just SNMP?
HostMonitor 11.00 (will be available soon) may check HP servers using iLO protocol.

Regards
Alex
Back to top
View user's profile Send private message Send e-mail Visit poster's website
itelio



Joined: 06 Nov 2014
Posts: 30

PostPosted: Wed Dec 20, 2017 9:50 am    Post subject: re Reply with quote

Hi

thanks for the answer

Here is the MIB File for HP MSA Storage Systems.
Will Hostmon be able to monitor this Storages also via ILO?
Finding out SNMP OIDs is so difficult.....

https://www.file-upload.net/download-12878345/mibs_P2000_fromHP.zip.html


Sensor Name
connUnitSensorName.32.128.0.192.255.29.184.46.0.0.0.0.0.00.0.1
On-Board Temperature 1-Ctlr A

Status of the Sensor -> Reply Value
connUnitSensorStatus.32.128.0.192.255.29.184.46.0.0.0.0.0.0.0.0.1
ok(3) --> this is the needed Information.


Message of the Sensor:
connUnitSensorMessage.32.128.0.192.255.29.184.46.0.0.0.0.0.0.0.0.1
On-Board Temperature 1-Ctlr A: 29 C 84.20F

Regards
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 11822
Location: USA

PostPosted: Wed Dec 20, 2017 3:05 pm    Post subject: Reply with quote

Thank you.
As I see you can check status of the sensor, integer=3 means status Ok.
unknown(1),
other(2), -- the sensor indicates other than ok, warning or failure.
ok(3), -- the sensor indicates ok
warning(4), -- the sensor indicates a warning
failed(5) -- the sensor indicates failure

There is connUnitSensorMessage counter, it may show error message related to the sensor.
I do not see "Value of the Sensor" data.

Quote:
Will Hostmon be able to monitor this Storages also via ILO?

I hope we upload version 11 next week, there are 5 tests related to HP iLO.
If you provide access, we can test it this week
(and correct our code if there are some problems related to this device...)

Regards
Alex
Back to top
View user's profile Send private message Send e-mail Visit poster's website
itelio



Joined: 06 Nov 2014
Posts: 30

PostPosted: Tue Feb 13, 2018 3:16 am    Post subject: re Reply with quote

Hi Alex,
Sorry for the late reply.
I would like to run tests in version 11 to monitor HP storages.
But the version 11 must be final available. BETA is not allowed with us as we also monitor our customers.

I would then report in this regard
Back to top
View user's profile Send private message
KS-Soft



Joined: 03 Apr 2002
Posts: 11822
Location: USA

PostPosted: Tue Feb 13, 2018 12:01 pm    Post subject: Reply with quote

Its good idea to install Beta on test system and check how it works with your config.
Otherwise you will receive release, install it on production system and suddenly discover - it does not work properly.

We test HostMonitor a lot and we do not upload anything that works unstable on our systems. But we cannot test HostMonitor on your system.
So far we did not get any bugs reports related to version 11.10. So, if there are any bugs, you will get them in release as well.

Regards
Alex
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KS-Soft Forum Index -> Other All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

KS-Soft Forum Index