Connection rejected by RMA

[mlimtl]

Hi,

I have changed my host server for Hostmonitor. Everything work great except one RMA on a server keeping to reject connection in log2.txt. At first it was a problem about port 1055 already in use so I changed the port to 1054 in the RMA and in the RMA MAnager on the host.

I also have try to retype my password ...

Any ides beside reboot the server with the RMA ?

[KS-Soft]

So, you see "Connection rejected" message in the log?
This means you forgot to change filter settings (type IP address of the host where HostMonitor is running now)
Quote from the manual

Security settings

Accept connections from any IP address
enabling this option will allow RMA to accept control commands from any IP address (as long as the incoming connection provides correct password)

Accept connections from following addresses
specifies the list of IP addresses. After enabling this option RMA will accept remote connections only from the addresses in this list (password is required as always). Usually you have to add just one address to this list, namely the one for the system where HostMonitor is running.
To add an address to the list press Insert key, to remove an address from the list press Ctrl+Del, to edit item press Enter or double-click it.

http://www.ks-soft.net/hostmon.eng/rma- ... m#Settings

Regards
Alex

[mlimtl]

&*^%#*&*(& ... typo in the address for Accept connections from following addresses ....

I don't know if you have ever listen a radio show or a CD from Bob and Tom but it's seems today that you're Mister Obvious awsering my stupid questions

Thanks for the quick and so always right reply

[KS-Soft]

No problem

Regards
Alex