View previous topic :: View next topic |
Author |
Message |
sajandrews
Joined: 02 Oct 2007 Posts: 2
|
Posted: Tue Oct 02, 2007 8:42 am Post subject: specific ip's |
|
|
Hello I have recently downloaded "ip tools" and have it on my 2k server. Is there any way to specifically monitor just one of the ip's i have connected to this server.
I have 23 connections on this particular server i want to monitor just one, i tried playing with the filters, but didn't get very far. Any help in clearing this situation up would be greatly appreciated. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Tue Oct 02, 2007 8:54 am Post subject: |
|
|
As I understand, you are talking about "Connections" tab, right? If you want to monitor particular connection from certain IP-address only, you have to use "Filter" options, located in "Connections" tab of the "Options" dialog. Quote from the manual:
http://www.ks-soft.net/ip-tools.eng/mframe.htm#ipt_opt.htm#Connections
=================================
# Address filter
Specify the addresses (or address ranges) you want to appear on or to be excluded from the list of current connections. Enter each address or a range of addresses on a separate line, as in the example below:
192.26.74.15
194.16.15.1 - 194.16.15.48
# Apply for
Specify whether the filter should be applied to the remote or local address, or to both.
=================================
Regards,
Max |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sajandrews
Joined: 02 Oct 2007 Posts: 2
|
Posted: Tue Oct 02, 2007 9:06 am Post subject: |
|
|
Thanks, i also realized that i had version 1.93 when i upgraded everything made alot more sense.
Thanks again! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|