| View previous topic :: View next topic |
| Author |
Message |
oioilu
Joined: 16 Mar 2007
Posts: 10
|
 Posted: Fri Mar 16, 2007 1:52 am Post subject: SMS error |
 |
|
Hi Support,
I have installed version 6.42 on my server. I set GSM option as below:
Com Port - Com1
Baud rate - 9600
Modem Type:WaveCom
Mode - PDU
PIN - 1111
I get error when send SMS .The log is :
[2007-03-16 15:40:06] Sys Set options .. Ok
[2007-03-16 15:40:07] Sys Com port open .. Ok
[2007-03-16 15:40:09] Sys GSM modem initialization .. Ok
[2007-03-16 15:40:26] Sys Error: Cannot send message to 13800210500. GSM modem error. ERROR was returned on AT command: AT+CMGS=24>0001000B813108200105F000F00CD4F29C0E6A97E7F3F0B90C
[2007-03-16 15:40:26] Sys Com port close .. Ok
[2007-03-16 15:40:26] Sys GSM modem deinitialization .. Ok
[2007-03-16 15:48:23] Sys Set options .. Ok
Also I test the AT command:
ATE0
OK
ATE1
OK
AT+CGMI
WAVECOM MODEM
OK
AT+CMGF=0
OK
AT+WIND
ERROR |
|
| Back to top |
|
 |
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Fri Mar 16, 2007 4:00 am Post subject: Re: SMS error |
|
|
I think, you should change BaudRate. Could you test it with BaudRate as 19200?
Regards,
Max
Last edited by KS-Soft Europe on Mon Mar 19, 2007 3:04 am; edited 1 time in total |
|
| Back to top |
|
|
oioilu
Joined: 16 Mar 2007
Posts: 10
|
| Posted: Sun Mar 18, 2007 11:22 pm Post subject: |
|
|
I changed BaudRate to 19200 and got log as below.
[2007-03-19 13:18:05] Sys Set options .. Ok
[2007-03-19 13:18:06] Sys Com port open .. Ok
[2007-03-19 13:18:42] Sys Com port close .. Ok
[2007-03-19 13:18:42] Sys Error: Cannot send message to 13818173720. GSM modem error. No reply on AT command: ATE1
[2007-03-19 13:18:51] Sys Set options .. Ok
It seems this modem can only work under 9600. 19200 not work here. |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Mon Mar 19, 2007 4:14 am Post subject: Re: SMS error |
|
|
| oioilu wrote: | AT+WIND
ERROR |
Could you also test the following commands, please:
AT+CGMI
AT+CGMM
Have you tried to select "WaveCom Fasttrack" Modem type?
Regards,
Max |
|
| Back to top |
|
|
oioilu
Joined: 16 Mar 2007
Posts: 10
|
| Posted: Mon Mar 26, 2007 2:21 am Post subject: Re: SMS error |
|
|
| KS-Soft Europe wrote: | | oioilu wrote: | AT+WIND
ERROR |
Could you also test the following commands, please:
AT+CGMI
AT+CGMM
Have you tried to select "WaveCom Fasttrack" Modem type?
Regards,
Max |
This is the answer:
at+CGMI
WAVECOM MODEM
OK
AT+CGMM
MULTIBAND 900E 1800
OK
I just tried "WaveCom Fasttrack" type. It works.Great!
Any difference betwen "WaveCom Fasttrack" and "WaveCom"?
Thanks for your great app! |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Mon Mar 26, 2007 2:43 am Post subject: Re: SMS error |
|
|
| oioilu wrote: | | I just tried "WaveCom Fasttrack" type. It works.Great! |
Glad to hear that.
| oioilu wrote: | | Any difference betwen "WaveCom Fasttrack" and "WaveCom"?! |
Minor difference in firmware.
| oioilu wrote: | | Thanks for your great app! |
You are welcome!
Regards,
Max |
|
| Back to top |
|
|
UrkoOn
Joined: 24 Apr 2007
Posts: 2
|
| Posted: Tue Apr 24, 2007 9:44 am Post subject: |
|
|
Hi!
I have the same problem, but the choice "Wavecom Fasttrack" doesen't work for me.
I can connect normaly through MS HyperTerminal.
I've tested and i could send SMS trough another program (ActiveXperts SMS and Pager toolkit).
I have the Wavecom Fastrack M1306B, using:
Com Port: Com1
Baud rate: 115200
Modem Type: Wavecom Fasttrack
Mode: PDU
PIN: xxxx
and i get the error:
Sending...
Com port open .. Ok
GSM modem initialization .. Ok
Error: Cannot send message to +386xxxxxxxx. GSM modem error. ERROR was returned on AT command: AT+CMGS=24>0001000B918346311422F100F00CD4F29C0E6A97E7F3F0B90C
Com port close .. Ok
GSM modem deinitialization .. Ok
By and thank you!
Blaž |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Tue Apr 24, 2007 10:35 am Post subject: |
|
|
| UrkoOn wrote: | | I have the Wavecom Fastrack M1306B |
I think, it is a baudrate issue. I know, that M1306B supports 115200, however, I recommend to use 19200. Could you try that?
In turn, if it will not help, could you try to select "WaveCom" instead of "WaveCom FastTrack" ModemType, just in case?
Regards,
Max |
|
| Back to top |
|
|
UrkoOn
Joined: 24 Apr 2007
Posts: 2
|
| Posted: Wed Apr 25, 2007 1:45 am Post subject: |
|
|
Hi!
Thank's four your reply!
I've revied all the settings again and i found the error. It was the Service center number - I've mistyped a number! 
Sorry for bothering you and thank for your help!
Have a nice day!
Blaž |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Wed Apr 25, 2007 5:31 am Post subject: |
|
|
| UrkoOn wrote: | | I've revied all the settings again and i found the error. It was the Service center number - I've mistyped a number! |
Glad it works. 
| UrkoOn wrote: | | Sorry for bothering you and thank for your help! |
You are welcome.
Regards,
Max |
|
| Back to top |
|
|
L.M.
Joined: 10 Dec 2007
Posts: 5
|
| Posted: Mon Dec 10, 2007 6:02 am Post subject: I can't send SMS with my Wavecom Fastrack M1306B! |
|
|
Hallo everybody,
I have a WAVECOM FASTRACK M1306B.
I can't send SMS using Hyperterminal.
I get the error:
at+cgmi
WAVECOM MODEM
OK
at+cgmm
MULTIBAND 900E 1800
OK
at+cgmr
641b09gg.Q2406B 1339080 041604 16:04
OK
at+cmgs="+39--------"
> ciao
> ->
+CMS ERROR: 513
Please, help me!
Thank you. |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Mon Dec 10, 2007 6:54 am Post subject: Re: I can't send SMS with my Wavecom Fastrack M1306B! |
|
|
| L.M. wrote: | | +CMS ERROR: 513 |
Actually, 'CMS ERROR: 513' means 'lower layer failure'. This error indicates a logical link failure or a RR sub-layer failure to the GMM sub-layer. The failure indicates an error that cannot be corrected by the lower layers. There are three possible causes for getting a +CMS ERROR: 513.
* The MS loses the radio link (or the network requests an RR disconnect).
* The MS does not receive an acknowledgement from the network for 28s after the transmission of the Short Message data and times out.
* The MS does not receive an acknowledgement from the network for 42s after the channel establishment request and times out.
Sorry, I do not hink we cn help in this case.
Regards,
Max |
|
| Back to top |
|
|
L.M.
Joined: 10 Dec 2007
Posts: 5
|
| Posted: Mon Dec 10, 2007 8:27 am Post subject: |
|
|
Hi,
thank you for your fast reply!
I think is not a network problem, because if I try to call a phonenumber,
it works perfectly! It's strange!
L.M. |
|
| Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006
Posts: 2832
|
| Posted: Mon Dec 10, 2007 8:41 am Post subject: |
|
|
| L.M. wrote: | I think is not a network problem, because if I try to call a phonenumber,
it works perfectly! |
I think, you have to specify the Service Center number, before starting typing message. You may use command AT+CSCA, e.g.:
| Code: | | AT+CSCA="+12222333334" |
where +12222333334 is a SMS Service center number.
See the listing below, as an example:
| Code: | ATE1
OK
AT+WIND=12
OK
AT+CPIN?
+CPIN: READY
AT+CREG?
+CREG: 0,2
OK
AT+CREG=1
OK
+CREG: 2
AT+CPMS?
+CPMS: "SM",0,20,"SM",0,20
OK
AT+CSMS?
+CSMS: 0,1,1,1
OK
AT+CSCA="+111111111"
OK
AT+CMGF=1
OK
AT+CSDH=1
OK
AT+CNMI=?
+CNMI: (0-3),(0-3),(0-3),(0-2),(0,1)
OK
AT+CNMI?
+CNMI: 2,1,1,2,0
OK
AT+CNMI=2,1,1,2,0
OK
AT+CMGL="ALL"
OK
AT+CGMI
WAVECOM MODEM
OK
AT+CGMM
MULTIBAND 900E 1800
OK
AT+CGMR
433_09gm.2C2 1263808 070902 18:42
OK
AT+CGSN
012345678901234
OK
AT+CSMP=1,,0,242
OK
AT+CMGS="+99999999"
> First Test-Message |
Regards,
Max |
|
| Back to top |
|
|
L.M.
Joined: 10 Dec 2007
Posts: 5
|
| Posted: Mon Mar 17, 2008 4:08 am Post subject: |
|
|
I succeed to send SMS following your advices.
The problem was the command: AT+CSMP.
My configuration was:
AT+CSMP?
+CSMP: 1,85,0,124 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in
