|
View previous topic :: View next topic |
Author |
Message |
KS-Soft
Joined: 03 Apr 2002 Posts: 12797 Location: USA
|
Posted: Thu Jul 26, 2007 6:36 am Post subject: |
|
|
Quote: | It returns "Windows cannot find the network path, verify that the network path is correct ................" |
Looks like you are using HostMonitor (not RMA) to check UNIX system. In such case you need samba client on UNIX system or NFS client on Windows system.
Quote: | In this case I use "Host Monitor"
In test method I use "UNC" |
So, why we are talking about RMA if you do not use RMA?
Regards
Alex |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Thu Jul 26, 2007 6:38 am Post subject: |
|
|
Lets clarify what exactly are you going to check. As I understand, you want to check the free space on the ESX Linux, right? That's why you have installed the agent on the ESX servers, right? So, let the agent check the "Drive Space" for you!
Please note: Remote Monitoring Agent is small application that accepts requests from HostMonitor, performs test and provides information about test result back to HostMonitor.
For instance, you want to check "total free space" of /home filesystem on ESX server, where the agent is installed. To make it work, you have to setup the "UNC" test method, from the "Test By" dropdown (that is located in the top of "Test Properties window") you have to select the appropriate agent (agent that is running on the ESX server). If you do not see the necessary agent in dropdown, you can setup it using "Agents List": http://www.ks-soft.net/hostmon.eng/mframe.htm#tests.htm#agentlist
Then you have to specify /home into "UNC" input box. That is all. The test will be performed by the agent. The agent is installed on the target machine, so you do not need to specify //servername/home/ or \servername\home\ - just /home
Could you try it once more?
Regards,
Max |
|
Back to top |
|
|
k2teknik
Joined: 24 Jul 2007 Posts: 8 Location: Denmark
|
Posted: Thu Jul 26, 2007 8:14 am Post subject: |
|
|
KS-Soft Europe wrote: | Lets clarify what exactly are you going to check. As I understand, you want to check the free space on the ESX Linux, right? That's why you have installed the agent on the ESX servers, right? So, let the agent check the "Drive Space" for you!
Please note: Remote Monitoring Agent is small application that accepts requests from HostMonitor, performs test and provides information about test result back to HostMonitor.
For instance, you want to check "total free space" of /home filesystem on ESX server, where the agent is installed. To make it work, you have to setup the "UNC" test method, from the "Test By" dropdown (that is located in the top of "Test Properties window") you have to select the appropriate agent (agent that is running on the ESX server). If you do not see the necessary agent in dropdown, you can setup it using "Agents List": http://www.ks-soft.net/hostmon.eng/mframe.htm#tests.htm#agentlist
Then you have to specify /home into "UNC" input box. That is all. The test will be performed by the agent. The agent is installed on the target machine, so you do not need to specify //servername/home/ or \servername\home\ - just /home
Could you try it once more?
Regards,
Max |
Thanks Max, you cleared it up for me.
Now it is working, I did write "/home" in path, and bingo !
I have tested with the agent and the same path as discriped earlyer, but I was not aware to outcount the servername.
I think that the instruction should have some sampels on how a path can look like, but if it had had so, I would not have been here
So now I will try to make the agent run on vmware 2.54.
Regards
/Hans |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Thu Jul 26, 2007 8:23 am Post subject: |
|
|
k2teknik wrote: | Thanks Max, you cleared it up for me. | You are welcome.
k2teknik wrote: | Now it is working, I did write "/home" in path, and bingo ! | Glad it works!
k2teknik wrote: | I think that the instruction should have some sampels on how a path can look like, but if it had had so, I would not have been here | The trick is that you have to specify the "local" filesystem ("local" for the agent of course), because the test is performed by the agent, not HostMonitor.
Actually, everythyng is described in the manual. Quote from the manual:
http://www.ks-soft.net/hostmon.eng/rma-unix/index.htm#use
==================
"Drive Free Space" test does not have sense for UNIX-like system because there are no drives, use UNC test instead (e.g. you can check free space for file system "/home")
==================
k2teknik wrote: | So now I will try to make the agent run on vmware 2.54. | Please, let us know how it works on 2.54
Regards,
Max |
|
Back to top |
|
|
Mogge
Joined: 04 Mar 2004 Posts: 83 Location: Denmark
|
Posted: Fri Jul 27, 2007 10:07 am Post subject: |
|
|
Wow!
That's what I call response
Great to hear that I'm not alone with the VMware question. Nice that some of you have had some positive result on the issue. The information I want to check up on is...
- Logs - hardware errors that is writen in the logs can give me an alarm on ie harddisk failure on the some raid disk or blown fans or some thing like that. In coorperation with that the hardware product normaly have some "speciel" software like CIM, Director or orthers that gives some log entries that HM could pick up
- Drive space... read the above comments... hmmmm.....
- .....
Look forward to return from vacation and build that test enviroment so this can be tested. Please continue with this comments - specialy regarding the installation on 3.0.1 - I'm a total geek on Linux
Very kind regards
/Mogge |
|
Back to top |
|
|
k2teknik
Joined: 24 Jul 2007 Posts: 8 Location: Denmark
|
Posted: Thu Aug 16, 2007 1:43 am Post subject: |
|
|
Now I had been installing/testing on vmware ESX 2.5x.
When starting the RMA agent on the ESX it complains about share access or missing file "libstdc++.so.5".
I was searching about "libstdc++.so.5" AND Red Hat 7.x on http://rpm.pbone.net.
It returns 4 results and "libstdc++-3.2-1.i386.rpm" contains the smallest number of files inculded "libstdc++.so.5".
So I install that, and the agent runs fine.
I chose to autostart the agent in /etc/inittab (it works too) with a line "rma::once:/etc/RMA/rma -d /etc/RMA/rma.ini"
Is this ok, or are there better ways ?
/Hans |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Thu Aug 16, 2007 2:03 am Post subject: |
|
|
k2teknik wrote: | Now I had been installing/testing on vmware ESX 2.5x.
When starting the RMA agent on the ESX it complains about share access or missing file "libstdc++.so.5".
I was searching about "libstdc++.so.5" AND Red Hat 7.x on http://rpm.pbone.net.
It returns 4 results and "libstdc++-3.2-1.i386.rpm" contains the smallest number of files inculded "libstdc++.so.5".
So I install that, and the agent runs fine. | Great! Thank you for your help.
k2teknik wrote: | I chose to autostart the agent in /etc/inittab (it works too) with a line "rma::once:/etc/RMA/rma -d /etc/RMA/rma.ini"
Is this ok, or are there better ways ? | Probably it would be better to put a start agent command into /etc/rc.d/rc.local file.
Another solution is to write a startup/shutdown script and place it into /etc/rc.d/init.d folder. Here is an example: http://www.ks-soft.net/cgi-bin/phpBB/viewtopic.php?t=2245&highlight=rma+startup
Regards,
Max |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Mon Aug 27, 2007 3:12 am Post subject: |
|
|
mos-eisley wrote: | but all my clients and HM server are virtual. | Normann, could you provide what more information about your Virtual configuration, please:
- What is the host OS (Windows, Linux)?
- What is the Virtual Machine (VMWare, Microsoft Virtual Server, other)?
- What exact Windows is running HostMonitor?
- Have you faced any problens running HostMonitor in virtual environment?
Regards,
Max |
|
Back to top |
|
|
mos-eisley
Joined: 21 Mar 2007 Posts: 76 Location: Klarup (AAlborg), Demark
|
Posted: Mon Aug 27, 2007 6:12 am Post subject: |
|
|
- What is the host OS (Windows, Linux)?
We have aprox. 100 Virtual Servers running Debian, CentOs, RedHat and SUSE in a mixture of versions and patches. Above that aprox 30. Windows 2003 Servers
All Linux'es are running with a RMA agent, most linux version 1.25, some 1.22
Windows Servers are running RMA agent 3.44
- What is the Virtual Machine (VMWare, Microsoft Virtual Server, other)?
ESX 2.5 and 3. I have 8 ESX server in production running the RMA agent in the service console.
- What exact Windows is running HostMonitor?
The HM server is a Windows 2003 Server SP2 - 1466 tests.
- Have you faced any problens running HostMonitor in virtual environment?
Close to none, som Linux misses a lib or 2, but my linux guy fixes that The only "problem" I have seen is when a "text log" test should pass/scan very large files, our backend (NFS) storage was loaded heavily, but these were files above 1 Gb.
I general I am very please with the setup, main issue is that agents cant perform tests/actions when disconnected from the main HM server. |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Mon Aug 27, 2007 6:20 am Post subject: |
|
|
Thank you for the reply. Information is very helpful for us.
Regards,
Max |
|
Back to top |
|
|
Mogge
Joined: 04 Mar 2004 Posts: 83 Location: Denmark
|
Posted: Tue Nov 13, 2007 2:47 pm Post subject: |
|
|
k2teknik / Hans - is there anyway I can reach you? mail - phone?
Have some questions 'bout the installation of the RMA...
...and yes... I'm danish to
/Mogge |
|
Back to top |
|
|
KS-Soft Europe
Joined: 16 May 2006 Posts: 2832
|
Posted: Tue Nov 13, 2007 3:01 pm Post subject: |
|
|
Mogge wrote: | Have some questions 'bout the installation of the RMA... | Have you faced to any problems installing RMA? Probably we could help?
Regards,
Max |
|
Back to top |
|
|
Mogge
Joined: 04 Mar 2004 Posts: 83 Location: Denmark
|
Posted: Tue Nov 13, 2007 3:07 pm Post subject: |
|
|
No, I was just intrested in talking to a person how have done a good installation on a ESX box - and it sure help if he's danish
Hans - looking forward to hear from you
/Mogge |
|
Back to top |
|
|
mos-eisley
Joined: 21 Mar 2007 Posts: 76 Location: Klarup (AAlborg), Demark
|
Posted: Wed Nov 14, 2007 12:31 am Post subject: |
|
|
I am Danish too
Hilsen
Normann P. Nielsen
End2End, Aalborg
Tlf: 25277268 - npn@end2endmobile.com |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|