| View previous topic :: View next topic |
| Author |
Message |
SONIAMR
Joined: 14 Feb 2005
Posts: 28
Location: Spain
|
 Posted: Mon Feb 14, 2005 5:47 am Post subject: About temperature monitor... |
 |
|
| Hi! I try to make a test using temperature monitor but I don't know exactly how it runs, I put the IP but then in the "probe" combo there's nothing. Maybe I have to install something in the computer? thanx |
|
| Back to top |
|
 |
KS-Soft
Joined: 03 Apr 2002
Posts: 12795
Location: USA
|
| Posted: Mon Feb 14, 2005 8:52 am Post subject: |
|
|
Quote from the manual: | Quote: | | If you utilize temperature-sensing units from Sensatronics (http://www.sensatronics.com/products_temperaturemonitor.html), this test provides you with the ability to monitor temperature and to start alert actions when temperature is out of the specified range. |
Do you have Sensatronics model E installed and connected to your network?
Regards
Alex |
|
| Back to top |
|
|
SONIAMR
Joined: 14 Feb 2005
Posts: 28
Location: Spain
|
| Posted: Tue Feb 15, 2005 2:56 am Post subject: Do you have Sensatronics model E installed and connected to |
|
|
we don't have this program installed. We are trying the program and I'm interested in a demo about this program. There's any demo available?
thanx |
|
| Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002
Posts: 12795
Location: USA
|
| Posted: Tue Feb 15, 2005 7:19 am Post subject: |
|
|
Its not a program, its device (hardware). Please visit Sensatronics' web site
Regards
Alex |
|
| Back to top |
|
|
timn
Joined: 20 Nov 2003
Posts: 184
Location: United States
|
|
| Back to top |
|
|
SONIAMR
Joined: 14 Feb 2005
Posts: 28
Location: Spain
|
| Posted: Thu Feb 17, 2005 2:40 am Post subject: |
|
|
thanx both of you for the link. We are trying the demo and I don't know if my boss want to spend money in a new hardware but I'll tell him anyway.
thanx!! |
|
| Back to top |
|
|
Thomas
Joined: 26 Mar 2005
Posts: 13
|
| Posted: Sat Mar 26, 2005 4:32 am Post subject: E4's and EM1 |
|
|
We use a Sensatronics E4 and EM1 to monitor temps in our building and server room.
I'm using HM 5.12 and the Temperature test works fine with the EM1 but gives an error on the E4.
How can I test the E4 to get a temperature reading?
Bonus question <g>: Can you give an example of how to get the humidity reading from an EM1?
Many thanks!
Thomas |
|
| Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002
Posts: 12795
Location: USA
|
| Posted: Sat Mar 26, 2005 6:42 pm Post subject: |
|
|
| Quote: | | Bonus question <g>: Can you give an example of how to get the humidity reading from an EM1? |
To check EM-1 module you may use SNMP Get test method, where:
- OID for temperature probe should look like 1.3.6.1.4.1.16174.1.1.3.3.<group#>.4.0
- OID for humidity probe should look like 1.3.6.1.4.1.16174.1.1.3.3.<group#>.7.0
- OID for wetness probe should look like 1.3.6.1.4.1.16174.1.1.3.3.<group#>.10.0
where group# is number from 1 to 4
E.g. OID to check humidity on 1st probe: 1.3.6.1.4.1.16174.1.1.3.3.1.7.0
| Quote: | | I'm using HM 5.12 and the Temperature test works fine with the EM1 but gives an error on the E4. |
Could you please be more specific: what exactly error appears?
Regards
Alex |
|
| Back to top |
|
|
Thomas
Joined: 26 Mar 2005
Posts: 13
|
| Posted: Sat Mar 26, 2005 7:18 pm Post subject: Sensatronics |
|
|
Thanks for the humidity setup - worked great!
Host Monitor gives an error that says "Bad Contents" when I try to test the E4.
Thanks
Thomas |
|
| Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002
Posts: 12795
Location: USA
|
| Posted: Sat Mar 26, 2005 9:23 pm Post subject: |
|
|
Is it possible to access your device from internet?
If not, could you use web browser to retrieve data from the device and send data to support@ks-soft.net?
Regards
Alex |
|
| Back to top |
|
|
Thomas
Joined: 26 Mar 2005
Posts: 13
|
| Posted: Sat Mar 26, 2005 10:03 pm Post subject: 63.96.6.250 |
|
|
Alex,
You can see the E4 at 63.96.6.250
Thanks,
Thomas |
|
| Back to top |
|
|
Thomas
Joined: 26 Mar 2005
Posts: 13
|
| Posted: Sun Mar 27, 2005 8:25 am Post subject: Got it |
|
|
Never mind.. I thought I had it figured out. 
Thomas |
|
| Back to top |
|
|
KS-Soft
Joined: 03 Apr 2002
Posts: 12795
Location: USA
|
| Posted: Sun Mar 27, 2005 3:52 pm Post subject: |
|
|
Would you like to share the solution?
May be somebody else has the same problem..
Regards
Alex |
|
| Back to top |
|
|
Thomas
Joined: 26 Mar 2005
Posts: 13
|
| Posted: Sun Mar 27, 2005 4:19 pm Post subject: Sorry.. |
|
|
I origionally had wrote in that message that I found out a solution but it was not successful.
So, never mind. ))
I'm still working on it but I can't communicate with the device via SNMP for some reason. FWiw, The E4 and EM1 share the same OID accorinding to Sensatronics.
They have the MIB available for download on their website but I need an SNMP tool to really understand these things...
Thanks
Thomas |
|
| Back to top |
|
|
timn
Joined: 20 Nov 2003
Posts: 184
Location: United States
|
| Posted: Mon Mar 28, 2005 8:07 am Post subject: Re: Sorry.. |
|
|
| Thomas wrote: | They have the MIB available for download on their website but I need an SNMP tool to really understand these things...
|
I'll go ahead and promote my favorite tool for this purpose, OIDView from ByteSphere. The pro version is just under $300 and they have a huge online MIB database.
However, if you do not frequently use SNMP to explore devices at your site, this may be an unnecessary expense. Perhaps some other participants here could recommend free or lower-cost utilities. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in
