Log Analyzer problem?

colstripcom · Post by **colstripcom** » Fri Mar 04, 2005 9:08 am

I have a few questions about an issue I am having. When look at last months log in the log analyzer the data is not concistent. Some tests show a period of 13 days some 27 days,26 days, ,25 days. These are all tests that have been running for months, When I look at the individual tests they seem to be having missing times. The tests are set to run every 30 seconds. somethimes they run every 30 seconds some times there can be several minutes between the results. I can send a log file if you wish to see.

Thanks,
Steve

KS-Soft · Post by **KS-Soft** » Fri Mar 04, 2005 9:29 am

You are using "write the record when test status change" logging option?
I beleive this problem was discussed right here, in previous topic
http://www.ks-soft.net/cgi-bin/phpBB/vi ... php?t=1806

Regards
Alex

colstripcom · Post by **colstripcom** » Thu Mar 10, 2005 8:06 am

I have changed the logging to log every event.. My tests still do not log every event. Do I need to shut down HM and start it againf for those changes to take effect?

colstripcom · Post by **colstripcom** » Thu Mar 10, 2005 8:24 am

***Update***

The log file seems to have all the data in it, but when I go to HM and look at the quicklog window it does not show all the tests.

KS-Soft · Post by **KS-Soft** » Thu Mar 10, 2005 1:53 pm

Quick log does not record info about all probes.
- If common and private logging mode for test item are set to "Default" or "Brief", quick log will display info about status changes.
- If common or private logging mode for test item are set to "Full" or "Reply", quick log will display info about status and "reply" changes.

Regards
Alex